◈ CERA COAT
◈ INTRODUCTION
CERA COAT posses chemical resistance at high temperature, high velocity.
CERA COAT protect ceramic fiber surface against acid material, sulfur, etc.
◈ CHARACTERISTICS
1) Good adhesion
2) Easy-application
3) Velocity-resistance (50m/sec)
4) Hot gas erosion resistance
◈ MAXIMUM SERVICE TEMPERATURE
: 1500℃
◈ COVERAGE
: 4 kg/M2
◈ USAGES
1) Bonding with ceramic fiber blanket and ceramic fiber module/block.
2) Adhesion with ceramic fiber and castable, plastic refractories
3) The hot face coating of ceramic fiber
◈ APPLICATION METHOD
1) Spray
2) Brush
◈ CHEMICAL COMPOSITION (%)
AL2O3
70%
SiO2
25%
Other
5%
◈ PACKGAE
: 20 kg/pail
◈ CERA STICS
◈ INTRODUCTION
CERA STICS is a coating material provided with good acid resistance and bonding property on refractory or concrete.
It is used to protect the casing from attacks by acid. It is usually installed within 1~3mm thickness.
◈ MAX.SERVICE TEMP.( ℃ ) 800℃
◈ MIN. TIME BEFORE FIRING (h) 24 Hrs
◈ SETTING CHARACTERISTIC Chemical setting
◈ BULK DENSITY (kg/m3) 1700kg/m3
◈ CHEMICAL ANALYSIS (%)
Al2O3 30.0%
SiO2 65.0%
◈ PHYSICAL PROPERTIES
Modulus of Rupture (Mpa) 110℃ x 24hrs 7.85Mpa
Permanent linear change (%) 110℃ x 24hrs -0.4 %
Thermal Conductivity(W/m.K) 500℃ x 24hrs 0.7
◈ AWATER REQUIRED (%) 17~20
◈ STORAGE LIFE 1 Year
◈ PACKING (KG/BAG) 30kg/pack
◈ APPLICATION METHOD Trowelling & Brushing